Selecting The Temperature; Setting The Heating Time; Overheating Protection; Frost Protection - Perel CH0003 Manual Del Usuario

7.1

Selecting the Temperature

1. Select the measurement unit. The selected unit will be displayed.
2. Now, set the target temperature with the increase/decrease button. The set temperature
value will be displayed.
7.2 Selecting the Heat Setting
The heat setting determines how quickly the appliance warms up.
1. Press the heat setting button repeatedly until the desired heat setting is displayed.
2. To distribute the heat more quickly, switch on the fan with the fan button.
7.3

Setting the Heating Time

This heater features a timer that you can use to set the desired heating time between 1 to
24 hours. Once the timer expired, the heater switches off automatically.
1. Press the timer button repeatedly until the desired runtime is displayed.
2. Switch off the timer by pressing the timer button repeatedly until no runtime is displayed.
7.4

Overheating Protection

This heater is equipped with an overheating protection, which will automatically switch off the
heater in case of overheating. If this occurs, please disconnect the heater, unplug from the
mains and allow cooling for 30 minutes before re-connecting and switching on again.
To avoid overheating, check that the appliance is sufficiently ventilated and that the air intakes
are unobstructed. Please contact your local dealer if the heater keeps switching off.
7.5

Frost Protection

This heater features a frost protection, which prevents the room temperature from falling down
the frost line. The heater will automatically switch on as soon as the temperature drops below
5 °C (41 °F), and switch off as soon as the temperature reaches 9 °C (48 °F).
Press the heat-setting button repeatedly until the frost protection symbol is displayed.
8.

Cleaning and Maintenance

Before cleaning, switch of the appliance, disconnect from the mains and allow to cool
completely.
Never immerse the appliance in water or any other liquid. Protect it from splashes and spraying
liquid.
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals,
cleaning solvents or strong detergents.
V. 03 – 03/06/2019
CH0003
7 ©Velleman nv