Shindaiwa M2510 Manual Del Propietário página 12

Maintenance (continued)
10 hour maintenance
(more frequently in dusty conditions)
1. Remove the air cleaner cover by loos-
ening the two thumbscrews.
2. Remove and inspect the pre-filter. If
the pre-filter is torn or otherwise dam-
aged, replace it with a new one.
a. Clean the pre-filter with soap and
water. Let dry before reinstalling.
1. Inspect the air cleaner element. If
the element is damaged or distorted,
replace it with a new one.
2. Tap filter gently on a hard surface to
dislodge debris from element or use
compressed air from the inside to
blow debris out and away from the air
cleaner element.
3. Install the air cleaner element, pre-
filter and cover in the reverse order of
removal.
10/15 hour maintenance
Enlever et nettoyer la bougie.
Enlever et nettoyer la bougie. Con-
sulter la section " Caractéristiques
techniques " pour le type correct de
bougie d'allumage et pour l'écart
d'électrode correct.
MISE EN GARDE !
Avant d'enlever la bougie, nettoyer
12
Loosen
thumbscrews
IMPORTANT!
Direct the air stream at the inside face of
the filter only!
element
CAUTION!
Never operate the unit if the air cleaner
assembly is damaged or missing!
0.6–0.7 mm
(0.024–0.028 inch)
The the spark plug
and adjust the gap at
the electrode