Important; Maintenance - Shindaiwa M2510 Manual Del Propietário

Maintenance

General maintenancel

IMPORTANT!

MAINTENANCE, REPLACEMENT
OR REPAIR OF EMISSION CONTROL
DEVICES AND SYSTEMS MAY BE PER-
FORMED BY ANY REPAIR ESTABLISH-
MENT OR INDIVIDUAL; HOWEVER,
WARRANTY REPAIRS MUST BE PER-
FORMED BY A DEALER OR SERVICE
CENTER AUTHORIZED BY Shindaiwa
INC. THE USE OF PARTS THAT ARE
NOT EQUIVALENT IN PERFORMANCE
AND DURABILITY TO AUTHORIZED
PARTS MAY IMPAIR THE EFFECTIVE-
NESS OF THE EMISSION CONTROL
SYSTEM AND MAY HAVE A BEARING
ON THE OUTCOME OF A WARRANTY
CLAIM.
WARNING!
Non-standard accessories,
cutting attachment, or replacement
parts may not operate properly with
your unit and may cause damage and
lead to personal injury.
Daily maintenance
Prior to each work day, perform the
following:
Remove all dirt and debris from the
engine, check the cooling fins and
air cleaner for clogging, and clean as
necessary.
Clean any debris or dirt from the cut-
ting attachment.
Check the entire unit for leaking fuel or
grease.
Check for loose or missing screws or
components. Make sure the cutter
attachment is securely fastened.
Make sure nuts, bolts, and screws
(except carburetor idle speed adjusting
screws) are tight.
Carefully remove any accumulations of
dirt or debris from the muffler and fuel
tank. Check cooling air intake area at
base of crankcase. Remove all debris.
Dirt build-up in these areas can lead to
engine overheating, fire, or premature
wear.
WARNING!
Before performing any main-
tenance, repair, or cleaning work on
the unit, make sure the engine and
cutting attachment are completely
stopped. Disconnect the spark plug
wire before performing service or
maintenance.
This unit must never be operated with a
faulty or missing spark arrester or muf-
fler. Make sure the muffler is well secured
and in good condition. A worn or damaged
muffler is a fire hazard and may also cause
hearing loss.
NOTE:
Using non-standard replacement parts
could invalidate your Shindaiwa warranty.
clogging, and clean as necessary
Spark Plug
Keep the spark plug and wire connections
tight and clean.
Fasteners
Make sure nuts, bolts, and screws (except
carburetor adjusting screws) are tight.
Air Filter
The C4 engine that powers your Shindaiwa
model is a hybrid 4-stroke engine. As a
hybrid, the engine is lubricated by oil
mixed with the gasoline and air from the
carburetor that moves through and around
the internal parts of the engine in a similar
way that a 2-stroke engine is lubricated.
Without the heavy duty 2-stage air filter
equipped on all C4 engines, dust and
dirt could also move through the engine,
decreasing engine life, increasing valve
wear and the need for more frequent valve
adjustments. To keep your C4 engine
strong and reliable, Shindaiwa recom-
mends that you check and service the air
filter as instructed in the 10-Hour Mainte-
Air
intake
11