Installation; Mounting The Pdu - Tripp-Lite PDUMH30NET El Manual Del Propietario

Installation

Mounting the PDU

Caution! Before mounting the PDU, ensure that a compatible, easily
accessible and properly grounded AC outlet is available in the location.
The PDU supports two mounting configurations: 2U Rack and Under-Counter.
Note: Regardless of configuration, the user must determine the fitness of hardware and
procedures before mounting. The PDU and included hardware are designed for common rack
and rack enclosure types and may not be appropriate for all applications. Exact mounting
configurations may vary. Screws for attaching the mounting brackets and cord retention shelves
to the PDU are included. Use only the screws supplied by the manufacturer, or their exact
equivalent (#8-32, 3/8" flat head screw for mounting bracket and #6-32, ¼" flat head screw
for cord retention shelves).
1-1
2U Rack Mounting: Attach the
included brackets to the sides of
the PDU (STEP
included screws. After installing the
brackets, position the PDU in the
rack and install four user-supplied
screws through the unit's brackets
(STEP
1B
as shown.
1-2
Under-Counter Mounting: Use 4
included screws
of the 2 mounting brackets
the PDU as shown. Mount the PDU
under the counter by inserting 2 or
more user-supplied screws
through the mounting brackets
and into secure mounting points.
1-3
Cord Retention Shelves
Attachment (Optional): Use
included screws
cord retention shelves
and bottom of the front panel of
the PDU as shown.
18-11-324-933686.indb 3
) with the
1A
) and into the rack rails
to attach each
A
to
B
C
to attach the
A
to the top
B
1A
1B
A
1-2
D
1-2
1-3
3
B
D
C
B
A
1/25/2019 3:24:36 PM