Installation Steps - AVS Bugflector Instrucciones De Instalación

Installation Steps

With the applique removed, use a 10mm nut driver to
remove the (5) exposed bolts.
3
Reach under the hood to the backside of the grill and disconnect
the hood lock rod from the grill by releasing the lock mechanism
and gently lifting the rod away from grill.
lock rod
5
Carefully lower hood.
7
Clean front of hood edge, and carefully raise hood.
9
NOTE: Actual application may vary slightly from illustrations.
lock
mechanism
4
Reach under the hood to the backside of the grill, and
6
NOTE: Tundra ONLY
Starting on the driver side top corner of the grill, and
then the passenger side, use the Pry Tool provided to
carefully pry the grill loose from the hood. Set grill aside.
8
NOTE: The grill will make a "popping" noise as it seperates
Align hood shield with hood edge.
10
Page 2 of 4
Carefully raise hood.
using a nut driver remove (10) nuts.
from the vehicle. This is normal.
grill
grill