Using Bluetooth Functions; Accepting An Incoming Call - Sensear SM1 Manual Del Usuario

Using Bluetooth Functions

The user must fi rst have connected the SM1x(SR) to the cell phone to use Bluetooth functions on
the SM1x(SR).
The functions are described below:

Accepting an incoming call

•
When the phone is ringing, press and release the "Multi-Function" button. Note that when the
phone is ringing, a ring tone will also be delivered by the SM1x(SR). In addition, the Blue LED
will fl ash at the faster rate.
•
After accepting the call, a brief "Call Accepted" sound will be heard and the Blue LED will continue
to fl ash at the faster rate.
Rejecting an incoming call
•
When the cell phone is ringing, press and hold the "Multi-Function" button for one second.
A "Call Rejected" sound will be heard and the Blue LED will return to fl ash at the normal rate.
If "Call Divert" is enabled on the cell phone, the caller will be directed to voicemail.
Ending an active call
• When the user is on a phone call, press and hold the "Multi-Function" button for one second.
A "Call Ended" sound will be heard and the Blue LED will return to fl ash at the normal rate.
Adjusting the Bluetooth phone call volume
• While the user is on a phone call, press and release the "Volume Up" button.
• While the user is on a phone call, press and release the "Volume Down" button.
Disconnecting the cell phone from SM1x(SR)
• Using the cell phone, navigate through the "Active Bluetooth Devices" menu, select the SM1x
and select "Disconnect". The Blue LED will turn off.
7