How To Operate; Remote Control Preparation - Panasonic CS-PA7GKD Manual Del Usuario

HOW TO OPERATE

REMOTE CONTROL PREPARATION

Inserting the batteries
Pull out
Close
• The retention period of batteries might be affected
to be shorter because of the using times of the
remote control, even less than one year.
MODE OPERATION
Select Turn on
AUTO HEAT
DRY COOL
AUTO MODE - FOR YOUR CONVENIENCE
• Unit selects the operation mode according to the room
temperature.
• Once auto mode is selected, the unit will operate at the
standard setting temperature.
• To change the standard setting temperature, press
" " or for " ".
Standard
Room Operation
setting
temperature mode
temperature (+2°C)
23°C & above Cool 25°C
Below 23°C Dry 22°C
Below 20°C Heat 21°C
HEAT MODE - TO ENJOY WARM AIR
• In heat mode, it takes a while for the unit to warm up. The
power indicator blinks during this operation.
• Recommended temperature: 20°C ~ 24°C
COOL MODE - TO ENJOY COOL AIR
• Recommended temperature: 26°C ~ 28°C
DRY MODE - TO DEHUMIDIFY THE
ENVIRONMENT
• During soft dry operation, the indoor fan operates at low
fan speed to give a very gentle cooling operation.
• Recommended temperature: 1°C ~ 2°C lower than room
temperature.
● For heat, cool and dry modes, the range of
temperature can be selected from 16°C ~ 30°C.
4
• Make sure it is not
• Certain fluorescent lights
Insert AAA or
R03 batteries
Adjust
temperature
LCD display
for
(–2°C)
27°C 23°C
24°C 20°C
23°C 19°C
Notes:
• Use a screwdriver to short the two Reset Terminals on the
• Remove the batteries if the unit is not to be used for a long
REMOTE CONTROL TRANSMITTER
obstructed.
may interfere with signal
transmission. Please
consult your nearest
dealer.
INDICATOR
Maximum distances : 8m
back of remote control to restore the remote control's default
setting.
period.
RECEIVER