Idiomas disponibles
Idiomas disponibles
(MODLED1, MODLED1F, MODLED2F, AND MODLED3F)
People's lives depend on your safe installation of our products. It is important to read,
understand and follow all instructions shipped with the products. In addition, listed below
are some other important safety instructions and precautions you should follow:
•
To properly install this light: you must have a good understanding of
automotive electrical procedures and systems, along with proficiency in the
installation and use of safety warning equipment.
•
When drilling into a vehicle structure, be sure that both sides of the surface
are clear of anything that could be damaged.
•
In order for the light to function properly, a separate ground connection must
be made. If practical, it should be connected to the negative battery terminal.
At a minimum, it may be attached to a solid metal body or chassis part that
will provide an effective ground path as long as the light system is to be used.
•
Locate light control so the VEHICLE and CONTROL can be operated safely
under all driving conditions.
•
Do not attempt to activate or deactivate light control while driving in a
hazardous situation.
•
This product contains high intensity LED devices. To prevent eye damage,
DO NOT stare into the light beam at close range.
•
You should frequently inspect the light to ensure that it is operating properly
and that it is securely attached to the vehicle.
•
File these instructions in a safe place and refer to them when maintaining
and/or reinstalling the product.
Failure to follow all safety precautions and instructions may result in property damage,
serious injury, or death to you or others.
I.
GENERAL.
The Model MODLED1 is a basic LED module. The module consists of a plastic enclosure
with 21 LEDs, optic lenses, and the electronic circuitry to light the LED array. The Model
MODLED1 is designed to mount within a bezel (MODLED1F, MODLED2F, MODLED3F) or
separately.
II.
UNPACKING.
After unpacking the light, inspect it for damage that may have occurred in transit. If
the unit has been damaged, do not attempt to install or operate it. File a claim immediately
with the carrier, stating the extent of damage. Carefully check all envelopes, shipping labels,
and tags before removing or destroying them. Ensure that the parts listed in the KIT
CONTENTS LIST are included in the package.
INSTRUCTION SHEET
MODLED™ LED MODULE ASSEMBLIES
SAFETY MESSAGE TO INSTALLERS AND OPERATORS
FOR
-1-
