Punktal MFA 604 Manual De Instrucciones página 22

2) Tone range
After setting the clock, the screen that appears after double-clicking the ⚙ button is
displayed.
At this point, a warning sounds and button sounds. The Yazılım Tone 0 "stage is selected as the
beginning of the software. When this level is reached, no sound is heard. As soon as you press "↑" or
"↓", "tone 0", "tone 1", "tone 2" are displayed and the tones of each section sound.
While the selected tone level is shown on the display, press the ⚙ button to set a new
buzzer and the brightness level will appear on the display.
3) Brightness adjustment
After setting the clock, the screen that appears after pressing the
At this point, the current time data is displayed on the display screen and the brightness icon is
displayed.
He starts to blink. Pressing and holding the "↑" or "↓" keys increases or decreases the brightness of
the display compared to the pressed key and changes the brightness of the display at present. ("↑" is
used to increase the brightness of the screen, "↓" is used to decrease the brightness of the screen.)
After adjusting the brightness on the display, press the
current time, the main menu.
4) Child lock
While the current time is shown on the display, press the ↓ key until the icon on the display becomes
active. When the ikon ↓ button is pressed, no button will work if the icon is active on the display.
To disconnect the child lock, press and hold the ↓ button until the icon goes out.
INSTALLATION
The appliance must be installed by qualified staff working in
accordance with the regulations in force.
The appliance is produced to EN 60 335-1, EN 60 335-2 and is of built-
in type, meaning that it must be installed in accordance with the
producer's instructions.
The oven must be installed in a unit having materials (varnishes,
finishes, glues, etc.) resistant to a temperature of at least 100°C. The
dimensions of the compartment for built-in installation are shown in
Fig. 1.
Prefit the 4 screws (see fig. 3) using the holes provided in the front
panel visible with the oven door open, making sure that the tips of
the screws go in the direction of the cabinet's wooden element.
Fit the oven into the unit and screw in the screws until comple-tely
tight.
If the oven is to be installed close to other household appliances, check
that there will be no mutual interference during operation. Their
respective electrical connections must be separate. Suitable ventilation
should be assured by means of an opening in the top of the column
unit, or an opening of 10 mm above the oven surround. See fig. 1.
CONNECTING TO THE ELECTRICAL MAINS
Before making the connection, check that:
key is pressed three times.
button to save the setting and display the