Punktal MFA 604 Manual De Instrucciones página 21

1-) Active switch
2-) CHILD LOCK
3-) CLOCK
5-) DISPLAY BRIGHTNESS
6-) AM or PM
7-) THERMOSTAT ACTIVE
8-) ALARM
When the first energy is supplied to the oven, "OFF" appears on the display, and the clock icon on the
display starts flashing. When the "↑" or "↓" keys are pressed, the user is prompted to enter the
current time data for setting the clock. ,
After entering the time parameters, the user saves the current time setting by pressing the
"⚙" button, and the control card is activated. (In the software, the time zone is defined as a 24-hour
time zone. If the user wants, the screen can be changed to 12-hour format by
pressing and holding the ✓ button for 4 seconds, and the AM or PM icon is activated.)
Basarak Press the ⚙ button to switch the alarm levels, tones, brightness, which make up the
menu.
1) Setting the alarm
After setting the clock, the screen that appears after pressing the "⚙" key once is displayed.
At this step, the "���� " and ����
alarm time. (Pressing and holding the keys increases the minute by one and increases the counting
speed after 20 seconds to accelerate to the desired time.)
The display values are hours and minutes. When the desired alarm time is reached by
pressing the "✓" button, the alarm time is saved and the "���� " icon is lit. The switch and
thermostat are then activated to trigger the alarm function.
If the switch and thermostat are on, the display shows the switch icon and the thermostat icon on the
display. After the user first opens the switch, and then the thermostat, the switch and temperature
icon light up on the display, and the oven starts to heat up, and the user-set alarm time is counted
down. After the user has set the alarm, simply press the "до" key until the alarm is reset to cancel the
alarm.
After the time entered by the user, the buzzer is activated and an alarm sounds. ⚙ Alarm
The alarm sounds until the key button is pressed.
i con blinks and the alarm keys ↑ "or" ↓ "are pressed to set the