Uline H-8529 Manual Del Usuario página 5

2. Turn the handle to the open position, and place the
locking cam (12) over the square shank of the door
handle. The latch must be facing down as shown.
(See Figure 11) Then place the locking cotter pin (13)
through the hole of the square shank. (See Figure 12)
13
12
Figure 11
3. With the handle still in the open position, hook
the locking bars (10) to the locking cam. Once in
position, slowly rotate the door handle to the closed
position so the lock bars protrude from the holes at
the top and bottom of the door. (See Figure 13)
10
12
PAGE 5 OF 15
ASSEMBLY CONTINUED
Figure 12
Figure 13
1-800-295-5510
uline.com
4. Slide the nylon lock bar guide inserts (14) over the
lock bar ends and through the door slots. Push
firmly until the guides snap into place. If necessary,
turn the handle back to the open position and
gently tap with a hammer until the guides slide into
place. (See Figure 14)
Figure 14
14
14
1120 IH-8529