Chicco LIVING SMART Instrucciones De Uso página 24

REMOVING THE SEAT
It is not necessary to remove the stroller lining to remove
the seat.
17. Press the orange button on the back of the backrest and
ADJUSTING THE BACKREST
18. Press the grey button on the stroller backrest to adjust the
inclination until you find the position you need (diagram 18).
ADJUSTING THE LEG REST
fixture (diagram 19) to adjust the leg rest to the required
position.
REMOVABLE BUMPER BAR
you. Open one side of the bumper bar only to seat the child
in the stroller more easily.
The bumper bar is NOT a child restraint device.
ERGONOMIC HANDGRIP
ADJUSTABLE DOUBLE TWIST
21. Press the button on the handgrip to rotate the handgrip
into the required position, according to the height and posi-
tion most suited to the user (diagram 21).
The handgrip can be adjusted to 8 different positions.
that the handgrips are locked in the UP position, as seen
in diagram 22 B.
PARKING BRAKE
time. To make it easier to use the stroller, a special STOP
& GO braking system has been installed, indicated by the
coloured stickers on the rear brake lever.
SWIVEL WHEELS
surfaces as it makes it easier to handle.
a straight position.
the same time.
CLOSING THE STROLLER
and all other children are at a safe distance. Ensure that
during these operations the moving parts of the stroller do
fitted in the front-facing position.
26. Raise the side compasses and fold the hood (diagram 26).
27. Pull both the small levers on the handles; keep them
stroller locks into a closed position (diagram 28).
29. To decrease the space the closed stroller takes up, recline
the backrest as flat as possible (diagram 29 A – front-facing
diagram 29 B – parent-facing).
fitted) before closing the stroller.
REMOVABLE COVERS
31. Release press stud A and the velcro fastener B as indi-
cated in diagram 31.
32. Raise the leg rest, release the buttons on the seat and
slide the lining off, paying attention to the harness straps
(diagram 32 A); remove the lining from the backrest by
(diagram 32 B).
USING THE CHILD CAR SEAT AND CARRYCOT
Please consult the relative instructions for information on
33. Before fitting the child car seat or carry-coat, remove
buttons on the inside of the armrests and then sliding out
the 3 tabs from their relative fixtures (diag. 33 A and B).
stroller frame can cause the fastening system to malfunc-
tion, making it impossible to remove it. In this case you can
relative slot (diagram 34).
ACCESSORIES
sarily present on some versions of the product. Please read
the instructions relative to the accessories fitted on the type
of stroller you purchased carefully.
JOINABLE HANDLE
the hooks A and B into the relative holes (diagram 35 B),
until you hear them click into place.
24
-
-