Power Supply - Bosch 3 600 HA1 1 Serie Manual De Instrucciones

OBJ_BUCH-2280-001.book Page 12 Wednesday, July 30, 2014 11:29 AM
12 | English
 Always direct the cable to the rear
away from the appliance.
 Use the machine only in the correct
orientation for its configuration.
This machine is not designed for use
inverted during vacuum mode.
 Never operate the leaf blower/gar-
den vacuum with defective guards or
shields, or without safety devices, for
example collection bag in place.
 Always ensure all handles and
guards supplied are fitted when us-
ing the leaf blower/garden vacuum.
Never attempt to use an incomplete
leaf blower/garden vacuum or one
with an unauthorised modification.
 While operating the leaf blower/gar-
den vacuum always be sure of a safe
and secure operating position at all
times.
 Always be aware of your surround-
ings and stay alert for possible haz-
ards that you may not hear whilst
operating the leaf blower/garden
vacuum.
 Do not over reach and keep your bal-
ance at all times.
 Always be sure of your footing on
slopes.
 Walk, never run.
 Keep all cooling air inlets clear of de-
bris.
 Never blow debris in the direction of
bystanders.
 Do not carry the machine by the ca-
ble.
 The wearing of a face mask is recom-
mended.
 Wear safety goggles.
F 016 L81 152 | (30.7.14)
 Do not modify this product. Unau-
thorized modifications may impair
the safety of your product and may
result in increased noise and vibra-
tion.
Remove the plug from the socket:
– Whenever you leave the machine.
– Before checking, clearing a blockage
or working on the leaf blower/garden
vacuum.
– After striking a foreign object, inspect
the leaf blower/garden vacuum for
damage and make repairs as neces-
sary.
– If the leaf blower/garden vacuum
starts to vibrate abnormally check im-
mediately.

Power supply

 The voltage indicated on the rating
plate must correspond to the volt-
age of the power source.
 We recommend that this equipment
is only connected into a socket
which is protected by a circuit-
breaker that would be actuated by a
30 mA residual current.
 Only use or replace power supply
cables for this unit which corre-
spond to the types indicated by the
manufacturer. See the operating in-
structions for the order no. and
types.
 Never touch the mains plug with wet
hands.
 Do not run over, crush or pull the
power supply cable or extension
lead, otherwise it may be damaged.
Bosch Power Tools