Care And Cleaning - LUND AVS Bugflector Instrucciones De Instalación

Installation Steps
Check position of hood shield. NOTE: Ensure that center flanges where tape will adhere are not in contact with top of grille.
9
NOTE: On 2010-14 Subaru Outback only, use taping method
indicated below.
Hood shield
Grille
10
Remove remaining tape liner by pulling on the free ends. Apply
pressure to flange to ensure proper adhesion of tape.
12

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality products offered by Lund International, Inc. We take the utmost pride in our products and
want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
™
Auto Ventshade , the Auto Ventshade
TM
NOTE: Actual application may vary slightly from illustrations.
800-241-7219 • Visit us at lundinternational.com
© 2015 Lund International, Inc. All rights reserved.
logo, the AVS
TM TM
Align front of shield with front edge of hood.
Press and hold hood shield against the upper surface of hood.
Hood
11
Remove adhesive backing and apply (2) bump
13
Lund International
logo, Lund and the Lund logo are trademarks of Lund International, Inc.
® ®
Page 3 of 3
Hood shield
Grille
ons to hood surface.
Hood