Tabla de contenido
Open the inner cover
Open the rear cradle lever and remove the print cartridge
Using a slightly dampened (de-ionized water is best) lent free cloth
gently wipe the nozzle head in an upward vertical direction. Do not
apply excessive force, as this could scratch the nozzle surface
Reinsert the print cartridge and inner cover
Note: If the print cartridge sits inactive for a period of time, ink may dry
clogging the nozzles. As a result white streaks will be visible in the printed
text or graphic on the document. Printing alone may not remove ink clogs.
Follow the steps above to properly clean the nozzle. If print quality does not
improve, gently shake the cartridge with the nozzle head towards the
cleaning cloth, causing a slight expulsion of ink on the cloth. Gently wipe
the nozzle head in an upward vertical direction. The Ink being pulled from
the cartridge will flush the nozzles out, then print a few lines of text or
graphics.
Technical Specifications
INK JET PRINTER
OPERATOR MANUAL
** Replaces "INK JET PRINTER" characteristics in section 6.1
Rear Ink Jet AGP (advanced Graphic Printer)
Printing capability, three versions
AGP 1: one line text/graph in any vertical position
AGP 2: two lines text/graph in any vertical position
AGP 4: four lines text/graph for full 1/2'' height Image
Alphanumeric characters: all MS Windows fonts.
Intelligent printing based on MICR or image
Automatic cartridge presence detection and empty cartridge alert
Page 52
Vision X AGP Addendum
Tabla de contenido
