Set Up Your Computer's Ip Address - Zyxel NWA3550 Guia De Inicio Rapido

2 Access the Web Configurator
Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later
versions with JavaScript enabled and pop-up blocking disabled.

2.1 Set Up Your Computer's IP Address

Note down your computer's current IP settings before you change them.
First, set your computer to use a static IP address in the 192.168.1.3 - 192.168.1.254
range with a subnet mask of 255.255.255.0. This ensures that your computer can
communicate with your NWA3550. See your User's Guide for information on setting up
your computer's IP address.
2.2 Log Into the Web Configurator
Even though you can connect to the NWA3550 wirelessly, it is
recommended that you connect your computer to the Ethernet port for
initial configuration.
1 Launch your web browser. Enter
192.168.1.2 (the NWA3550's default
IP address) as the address.
If you cannot access the Web configurator, make sure the IP addresses
and subnet masks of the NWA3550 and the computer are in the same IP
address range (see Section 2.1).
ENGLISH
4