Zyxel NWA3550 Guia De Inicio Rapido página 13

4.1.2 Assembling the Mounting Bracket
1 Use one M8*110 screw, one M8 washer, one M8 spring washer and one M8 nut to
attach the wall/pole bracket to the articulation bracket.
4.1.3 Pole Mounting
1 Align the mounting bracket with the holes
on the rear of the NWA3550. Insert four
M5*12 screws into the holes and use a
wrench to tighten the screws with the M5
washers.
2 Place the mounting bracket around a pole.
Align the pole mounting bar with the holes
on the wall/pole bracket. Insert two M8*110
screws into the holes and use a wrench to
tighten the screws with the M8 washers
and M8 Spring Washers.
ENGLISH
13