Functions - Pause, Wake Up And Shut Down; Time Scheduling Settings - V-TAC VT-5555 Manual De Instrucciones

Functions - Pause, Wakeup & shutdown
Pause: During the operation of the Robot, press the pause key or the remote control pause key to
Awaken: If the Robot stops working for more than ten minutes, it will automatically enter sleep mode (The Robot lights will turn off).You can wake up the
Robot by clicking the Start/Pause Key(Robot key) on the device, then click the Robot key or any key of the remote controller and app to restart
Shutdown: After the Robot stops working, press the Start/Pause Key(Robot key) for a long time, and the indicator light of the Robot machine
goes switches off to indicate that the machine has been shut down.
*After the Robot finishes its work, it is recommended not to shut it down, so as to keep it in a state of charge, in order to better carry out
next time.
Function - Time Scheduling Setting
Scheduling ：Press the remote control button
to set the Scheduling time, once done press the button
at the scheduled time.
PS：Before the time scheduling setting, you need to use the button
then press the key to set the time of Robot,when you have selected the time then done press
completed.
to set the Robot time scheduling. Press the button
again to complete the settings. The Robot will automatically clean up
to set the clock of the Robot first. Press the button
10
pause the operation of the Robot.
,then press the key
,then the setting is