Auriol HG06061A-US Instrucciones De Utilización Y De Seguridad página 20

You may reactivate reception by pressing and holding the
+ / MEM
radio tower symbol
The time can also be set manually. For more details please
refer to section Basic settings.
Wall-mounting the temperature station and / or the
outdoor sensor:
Note: This step requires an electric drill and a crosshead
screwdriver.
DANGER TO LIFE, RISK OF INJURY AND PROPERTY
DAMAGE! Carefully read the instructions for use and safety
notes for your drill.
DANGER TO LIFE! Be careful that you do not hit electrical,
gas or water lines when drilling into the wall. If necessary,
check the wall with a wall scanner before drilling.
Outdoor sensor
Mark the location of the hole (D 0.2 in / 6 mm) on the wall.
Note: Use the included drilling template intended for marking
the drill holes.
Drill the hole with an electric drill.
Push the dowel
Using a crosshead screwdriver, screw the screw
wall anchor.
Hang the outdoor sensor by placing the hanger
the screw.
20 US-EN
337765_1907_aur_Funk-Wetterstation_Content_US.indd 20
and – / CH button
10
in the time panel
into the drilled hole.
28
for three seconds until a
9
becomes animated.
5
27
21
into the
on
13.01.20 10:19