Ingun MA Serie Manual Del Usuario página 32

Appropriate extraction tools are also available from INGUN to replace defective receptacles. The
tool cuts into the wall of the used receptacle when screwed in. Using the spring-loaded weight, the
receptacle can then be removed without damaging the mounting hole.
Extraction tool for receptacles
7.3) Cleaning test probes
Test probes can be cleaned with commercially available, soft plastic or glass fibre brush or clean-
ing mats to remove severe contamination.
ATTENTION P
OSSIBLE DAMAGE TO PROPERTY
High radial forces can lead to deformation of the probe.
Ensure no side forces act on the test probes during the cleaning process!

NOTE W
EAR OF PLATING
Manual cleaning of the test probe plunger tips has a slightly abrasive effect on the outer plating.
31
Insertion and extraction tools for test probes
©
INGUN: Subject to technical changes without notice. E&OE.
1) Stop
2) Weight
3) Compression spring
4) Adapter
5) Threaded pin
6) Insert (bit)
7) Probe plate
8) Receptacle
!
English