Installing The Power Adapter; Maintenance Instructions - Intermec PB2 Manual De Instrucciones

INSTALLING THE POWER ADAPTER

Connect to vehicle
power outlet
OPERATING INSTRUCTIONS
This device allows you to power and charge your PB2/PB3 or
PR2/PR3 through the vehicle power port. However, before using
the vehicle power adapter, make sure that the unit is installed as
shown in
CAUTION: Risk of fire. Do not replace any vehicle fuse
with a rating higher than recommended by the vehicle
manufacturer.
This product is rated to draw a maximum of 2.5 amperes from a
12 to 24 V vehicle outlet. Ensure that the electrical system in your
vehicle can supply this product without causing the vehicle
fusing to open. This can be determined by making sure the fuse
in the vehicle which protects the outlet is rated higher than 2.5
amperes. Information on the vehicle fuse ratings is typically
found in the vehicle operator's manual. The vehicle power
adapter has a user-replaceable fuse rated 2.5 A.
CAUTION: The vehicle power adapter fuse must only be
replaced with the same type of fuse with the same rating.

MAINTENANCE INSTRUCTIONS

Disconnect before cleaning. Do not immerse. Do not
disassemble. All other servicing should be performed by qualified
service personnel.
4
"INSTALLING THE POWER ADAPTER."
Connect to
PB2/PB3 or PR2/PR3