Cn70/Cn70E Magstripe Reader Snap-On Adapter; (1000Aa06) Instructions - Intermec CN70 Instrucciones

CN70/CN70e Magstripe Reader Snap-On
Adapter (1000AA06) Instructions
Configuring the COM Port
Before you attach the adapter for the first time, you need to configure the
COM port.
1 Tap Start > Settings > System > Intermec Settings >
Communications > Serial Port Switch > select COM5 docking.
2 When prompted to save and reboot, tap ok.
3 Tap OK to save.
4 Press the Power button.
5 Tap Reboot. The computer systematically reboots.
Attaching the Adapter
After you attach the adapter, you have the option of installing the adapter
with the screws provided.
Status LED
Note: When the magstripe reader is initially attached, the status
LED is solid for 3 seconds.
Configuring the Adapter
After you attach the adapter, you need to enable the adapter.
1 Tap Start > Settings > System > Intermec Settings > Data Collection >
Magstripe reader > Enable MSR.
2 Tap OK. The computer is now configured to use the magstripe reader.
3