Pb2/Pb3 And Pr2/Pr3 Vehicle Power Adapter (Ae38); Instructions - Intermec PB2 Manual De Instrucciones

PB2/PB3 and PR2/PR3 Vehicle Power
Adapter (AE38) Instructions
IMPORTANT SAFETY INSTRUCTIONS
1 SAVE THESE INSTRUCTIONS. This manual contains
2 Before using the power adapter, read all instructions and
3 CAUTION: To reduce risk of injury, use with only Intermec
4 Do not expose power adapter to rain, moisture, or snow.
5 Use of an attachment not recommended or sold by Intermec
6 To reduce risk of damage to power adapter connector and
7 Make sure that cord is located so that it will not be stepped
8 Do not operate the power adapter with a damaged cord or
9 Do not operate power adapter if it has received a sharp blow,
10 Do not disassemble power adapter; take it to a qualified
11 To reduce risk of electric shock, unplug power adapter before
12 Internal voltage regulation within the PB2/PB3 limits the
important safety and operating instructions for the Model
AE38 vehicle power adapter.
cautionary markings on the power adapter, the battery, and
the product using the battery.
Model PB2/PB3 or PR2/PR3. Use of this product with other
devices may cause injury to persons and damage.
may result in a risk of fire, electric shock, or injury to persons.
cord, pull by power adapter connector rather than cord when
disconnecting power adapter.
on, tripped over, or otherwise subjected to damage or stress.
power adapter connector - replace it immediately.
been dropped or otherwise damaged in any way; take it to a
qualified service person.
service person when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
attempting any maintenance or cleaning.
voltage supplied to charge the Model 318-040-001 Li-ion
battery. Internal voltage regulation within the PR2/PR3
limits the voltage supplied to charge the Model 1013AB01 or
1013AB02 Li-ion battery. The use of any other type of battery
in the PB2/PB3 or PR2/PR3 while charging may burst
causing personal injury and damage. Do not charge batteries
in a modified or damaged PB2/PB3 or PR2/PR3, doing so
may result in risk of battery explosion or fire.
3