Fluke Networks SimpliFiber Pro Guía De Uso página 9

Specifications
Temperature
Altitude
Emitter type
Central wavelength
Spectral width (FWHM)
Minimum output power
Power output stability
Auto dual-wavelength
switching
Optical connector
FindFiber ID generation
Output modes
Power requirement
2
Battery life
Automatic power-off
Low battery warning
Size
Weight
1. 23°C ±2°C, after 5 minutes of warm-up time.
2. In auto-wavelength mode. Battery life depends on the condition
and type of batteries used. Fluke Networks recommends alkaline
batteries.
Operating: -10ºC to +50ºC
Storage: -20ºC to +50ºC
Operating: 4,000 m
Storage: 12,000 m
LED: dual 850 nm/1300 nm
850 nm: +30 nm
1300 nm: ±20 nm
850 nm: 50 nm (typical)
1300 nm: 170 nm (maximum)
850/1300 nm:  -20 dBm
±0.1 dB over 8 hours
1
Yes. Can be enabled or
disabled by the user.
Fixed SC
Yes. Fixed at ID 1.
CW (continuous wave), 2 kHz
modulated, auto-wavelength
2 AA alkaline batteries, NEDA
15A, IEC LR6
40 hours (typical)
30 minutes (can be disabled by
the user)
Blinking LED
5.6 in x 3.2 in x 1.6 in
(14.2 cm x 8.1 cm x 4.1 cm)
9.8 oz (278 g)
Specifications
7