Control Panel - Polar GG216 Manual De Instrucciones

Installation
Note: If the appliance has been stored or moved in a non-vertical position, stand it in an
upright position for approximately 12 hours before operation. If in doubt allow to stand.
1. Remove the appliance from the packaging and remove the protective film from all surfaces.
2. When positioning, maintain a distance of 20cm (7 inches) between the appliance and walls or other
objects for ventilation. Increase the distance if the obstacle is a heat source.
Note: Maximum loading of shelves is 15kgs

Control Panel

Operation
POWER
Position 0 unit is OFF
Position l unit is ON
LIGHT
Position 0 display light is OFF
Position l display light is ON
HEAT
Position 0 glass defrost heater is OFF
Position l glass defrost heater is ON
UK