Using The Setup Wizard - Cisco Systems Linksys WRE54G Guía De Instalación Rápida

3

Using the Setup Wizard

After you have powered on the
Range Expander and placed it near
your wireless router or access point,
run the Setup Wizard.
A
Insert the Setup Wizard CD into
your PC's CD-ROM drive. The
Setup Wizard should run
automatically, and the
Welcome screen should
appear. If it does not, click the
Start button and choose Run.
In the field that appears, enter
D:\setup.exe (if "D" is the letter
of your CD-ROM drive).
B
Click the Setup button.
C
Make sure your access point or
wireless router is working
properly. Then click Next. If the
Range Expander is connected
through the Ethernet port,
continue to Step E.
D
When using a wireless
connection, the Setup Wizard
will run a search for your wireless
network's settings. If found, you
will be asked to confirm the
settings. If the settings are
correct, click Yes and proceed
to step G. If you'd like to choose
a different wireless network,
proceed to step E.
You will be notified if no wireless
network is found. Make sure
your wireless network is
operational. Then click
Continue to run the search
again, and proceed to step E.
4
If your wireless network
NOTE:
fails to detect the Range
Expander, run the Setup Wiz-
ard again using the Ethernet
connection.
B
D
1
D
2