Bissell SPOTBOT Guía De Usuario página 7

Filling Your Clean Water/Formula Tank:
with
For antibacterial cleaning benefits, use your SpotBot® on one of the automatic
cleaning cycles. If you're not using a formula with the EasyFill system (yellow cap),
please refer to page 8 for other filling instructions.
1
Remove the Clean Water/Formula Tank
by lifting it straight up and then away
from the unit.
3
1
1) Set tank on a flat surface & unscrew
the yellow cap. Twist the yellow cap back
into place. 2) Firmly insert the formula
bottle into the yellow cap on the Clean
Water/Formula Tank. Simply squeeze
until formula reaches the Easy Fill line as
seen on the tank.
A few notes about filling the
Clean Water/Formula Tank:
• The tank has three support points (the
nozzle and two corners of the tank)
when placed on a flat surface, the tank
will rest securely.
• Follow fill lines for "Easy Fill formula"
as indicated on the left side of tank.
• Fill with hot (140°F/60°C MAX)
tap water and add the appropriate
BISSELL® formula.
DO NOT USE BOILING WATER. DO NOT
HEAT WATER OR TANK IN MICROWAVE.
• When using BISSELL Deep Clean +
Antibacterial formula: only fill your
Clean Water/Formula Tank with the
recommended amount of water and
formula to achieve anti-bacterial
benefits.
formula
2
2
1
1) Unscrew the yellow cap from the Clean
Water/Formula Tank. 2) Add warm tap
water to the water fill line. 140⁰F/60⁰C
MAX.
4
Set tank back on unit.
2
www.BISSELL.com
7