Mechanical Installation - Hach SD900 Refrigerated Sampler Manual Básico Del Usuario

Figure 2 Sampler components
1 Optional cover (8963)
2 Refrigerated sampler
3 Components for single-bottle option
4 Components for multiple-bottle option
Installation
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.

Mechanical installation

Site installation guidelines
Explosion hazard. The instrument is not approved for installation in hazardous locations.
• The refrigerated sampler must be installed in an indoor location. The AWRS can be installed in an
outdoor location.
• Make sure that the temperature at the site location is within the specifications.
• Install the sampler on a level surface. Adjust the sampler feet to make the sampler level.
• Use the installed anchor brackets and user-supplied
• Plumb a drain tube to the ½ in.-14 NPT female connector on the bottom of the sampler.
5 All weather refrigerated sampler
6 Replacement pump tubing
7 Intake tubing, vinyl or teflon-lined
8 Strainer
D A N G E R
D A N G E R
3
/ -in. bolts for the AWRS. Refer to
8
Figure 3.
English 9