Kohler K-1158-H2 Guia De Instalacion página 2

No change in measurements if connected
with drain illustrated. (K-7161-AF)
41-3/4" (106 cm)
2"
(5.1 cm)
Product Information
Applicable product:
Drop-in bath whirlpool
Fixture*:
Bathing area:
Basin area, 46" (116.8 cm) x 30" (76.2 cm)
bottom
Basin area, top 57" (144 .8 cm) x 34" (86.4 cm)
Weight 130 lbs (59 kg)
To overflow:
Water depth 16" (40.6 cm)
Capacity 95 gal (359.6 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template
Pump Heater
1.5 kW
Minimum access panel:
Pump/control 34" (86.4 cm) W x 15" (38.1 cm) H
Required accessories:
Jet trim kit
1043843-1-C
Pump/Control Access
22"
(55.9 cm)
K-1158-H2
1043292-7
V Hz A
220-240 50/60 11
K-9698
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Pump/control
Locate the outlet behind the whirlpool and within 24"
(61 cm) of the pump.
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 48
lbs/square foot (233.6 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
This bath whirlpool is designed for drop-in installation only. It is
not suited for use in a three-wall alcove with an overhead shower.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
required
2
11-1/4" (28.6 cm)
65-7/8" (167.3 cm)
1" (2.5 cm)
2-7/8"
(7.3 cm)
220-240 V, 20 A, 50/60 Hz
20-7/8"
(53 cm)
2-1/4"
(5.7 cm)
2-3/4"
(7 cm)
1-1/2" OD
Kohler Co.