Keypad Functions - MEI CASHFLOW 7000 Serie Manual De Instrucciones

On the front of the CashFlow
The keypad has three LEDs, six function buttons, large menu display and
depending on the changegiver model, an infrared port.
This keypad allows you to dispense coins from the five-tube dispenser, access &
navigate through the configuration menus and monitor the status of the
changegiver.
1
1 3 LEDs
2 A to E
3 Display (LCD)
4 Mode Button
5 Service Connector
The LEDs provide a visual indication by light flashes that report the state of the
changegiver. An LED can either be ON, OFF or FLASHING. These light flash
codes can indicate when the changegiver is operating normally, is in
configuration/program mode or has a fault. (Refer to the LED light code section for
more information).
The blue keys (marked A to E) have two functions.
When the changegiver is in idle mode, pressing a blue button on its own will
dispense a coin from that tube. When you press and hold the blue button for
approx. 4 seconds, this activates auto dispense (latch dispensing of coins) until
the tube is empty of coins. If however, the yellow (mode) button is pressed, the
blue buttons are then used for navigation through the changegiver service and
set-up mode menus. (Refer to menu structure section).
Service Mode: gives access to the most frequently used product configuration
options. (See Service Mode Options)
Set-up Mode: gives access to general product configuration options that are
required when setting up your changegiver. (See Set-up Mode Options)

KEYPAD FUNCTIONS

®
7000 changegiver there is a user interface keypad.
2
3 4
Red, Amber, Green
Dispense coins & navigate through menus
Menu information & warning display
Access service & set-up menus
CPM Compatible
Page 4 of 10
5