Oce TDS700 Manual Del Usuario página 180

Océ TDS700 Safety data sheets
Safety data sheet Océ TDS700 Developer
[47]
MATERIAL SAFETY DATA SHEET
(2001/58/EC and ISO 11014-1)
Océ TDS700 Developer
1. Product identification
Product name
Packing
Use of product
2. Composition / information on ingredients
Ingredients-Name
Iron oxide
Phenoxy resin
Polyester resin
Amorphous silica
Carbon black
Pigments
3. Hazards identification
The product is not classified as a dangerous preparation according to Directive 1999/45/EC for the classification, packaging and labelling of
dangerous substances and preparations. To our knowledge, with due observance of the recommended exposure limits and of normal hygiene
these products present no health hazard in normal use.
In a dust cloud the formation of an explosive dust-air mixture is possible. Dust may cause discomfort for the eyes and respirat o ry tract, in the
same manner as inert nuisance dust.
4. First aid measures
Eyes contact
Skin contact
Inhalation
Ingestion
For any medical advice take along this material safety data sheet.
5. Fire fighting measures
Extinguishing media
Special fire fighting protective equipment
Combustion products
6. Accidental release measures
Avoid breathing dust. Do not wash away into sewer. Spills can be cleaned with a vacuum cleaner or a damp rag. Avoid formation of dust.
7. Handling and storage
Keep bottle tightly closed to prevent dust formation. Handle carefully. Avoid breathing dust.
Room ventilation: see operator manual or safety data sheet for the copier/printer.
No special technical measures for storage.
Directions for use: see label on the bottle and operator manual of the copier/printer.
8. Exposure controls / personal protection No special technical measures. No personal protective equipment needed.
Industrial hygiene: after skin contact wash with cold water and soap.
ACGIH Threshold Limit Value are 10 mg/m
TLV for
Continued on the next page.
180 Appendix B Safety data sheets
Océ TDS700 Developer
Polyethylene bottle, contents 1,75 kg/3.86 lb.
Ink powder for copiers/printers
CAS No./EC No.
1317-61-9/215-277-5
PMN P-95-461/polymer
170831-75-1/polymer
68611-44-9/271-893-4
1333-86-4 / 215-609-9
Rinse with plenty of water.
Wash with cold water and soap.
Clean nose, mouth, throat. Cough up. Fresh air.
Rinse mouth with water. If large quantity swallowed seek medical advice.
Dry chemical, carbon dioxide, water spray (fog), foam.
N.A. (= Not Applicable)
Carbon dioxide, carbon monoxide
3
for inhalable particulate and 3 mg/m
3
* carbon black 3,5 mg/m
3
* amorphous silica 10 mg/m
Number E-308-a-NL
Date May 2006
Page 1 of 2
EC-Symbol, R-Phrases Weigh %
none 50-100
none 1-5
none 1-5
none < 1
none < 1
< 1
3
for respirable particulate.