Chauvet DJ Geyser RGB Jr Guía De Referencia Rápida página 4

Geyser™ RGB Jr. QRG
Fuse
Replacement
Mounting
Mounting
Diagram
Fluid Tank
Orientation
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse
holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap
and replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the Safety Notes.
Overhead Mounting – Downward Fog Jet
Floor Mounting – Vertical Fog Jet
Note: Remove the fluid tank from the holder and set it upright on
an adjacent surface when mounting the Geyser™ RGB Jr. in an
inverted position to avoid leaking.
Fog Fluid Line
Vertical Fog Jet
To avoid spillage with any mounting, always position the fluid
tank with the tank's cap in the uppermost position above the
tank's fog fluid line.
4
Floor Mounting –
Horizontal Fog Jet
Horizontal Fog Jet
EN