Service; Appliance-Specific Safety Instructions For Hedge Trimmers; Supplementary Safety Instructions For Hedge Trimmers - FLORABEST FHEHS 900 B2 Traducción Del Manual De Instrucciones Original

5. Service

a) Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
Appliance-specific safety instructions for hedge
trimmers
■ Keep your hands away from the cutting blades. Do not attempt to
clear clippings or hold onto the material to be cut while the blades
are still in motion. Remove any jammed clippings only when the
appliance has been switched off. Also remove the plug from the
power socket. A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
■ Carry the hedge trimmer by the front handle when switched off, and
with the cutter bar facing away from your body. When transporting
or storing the trimmer, always put on the protective cover. Careful
handling of the appliance reduces the likelihood of accidental contact
with the moving blades.
■ Hold the power tool only by the insulated grips as the cutting blades
could come into contact with hidden power lines or the appliance's
own power cable. Contact between the blades and a live wire may
make exposed metal parts of the power tool live and could give the
operator an electric shock.
■ Keep the cable out of the cutting area. While working, the cable can
be hidden in the bushes and be accidentally cut.
■ Inspect the surface to be cut carefully and remove any wires or other
obstructions.
■ It is recommended to use a residual current circuit breaker with a trip-
ping current of 30 mA or less.
NOTE
► The hedge trimmer is supplied completely assembled.
► Graphical representations illustrating the usage of the hedge trimmer
and its operating controls can be found on the fold-out page.
► Notes and diagrams of the settings, maintenance and lubrication by
the user can be found in these instructions.
► Notes on the working position (see fold-out page).
► Notes on the operating controls (see fold-out page).
► Notes on exchange and repair (see section Maintenance and
cleaning/service).
► Explanation of all graphical symbols used on the hedge trimmer and
technical data can be found in these instructions.
► The features of the hedge trimmer can be found in the technical data.
► Blocked tool: Remove any blockages from the cutter bar
CAUTION!
► In the event of imminent danger or an emergency switch off the
motor immediately and unplug the appliance.
FHEHS 900 B2
Supplementary safety instructions for hedge
trimmers
Preparation:
a) THE HEDGE TRIMMER CAN CAUSE SERIOUS INJURIES! Read the
instructions on correct handling, preparation, maintenance, starting and
stopping the hedge trimmer very carefully. Familiarise yourself with all
manual controls and the proper use of the hedge trimmer.
b) Children may never use the hedge trimmer.
c) Beware of above-ground power lines.
d) Do not use the hedge trimmer while anyone, especially children, is in
the vicinity.
e) Wear suitable clothing! Do not wear loose clothing or jewellery which
could get caught in moving parts. We recommend wearing heavy-duty
gloves, non-slip footwear and goggles.
f) If the cutting unit comes in contact with a foreign object or if the oper-
ating noise increases or the hedge trimmer starts to vibrate abnormally,
stop the motor and allow the hedge trimmer to come to a standstill.
Take the following measures:
–
check for damage;
–
check for loose parts and secure all the loose parts;
–
replace damaged parts with equivalent parts or have them re-
paired.
g) Wear ear protection!
h) Wear safety goggles!
i) To stop the hedge trimmer in an emergency situation, remove the plug
from the power socket.
Office:
a) Remove the plug from the powert socket:
–
cleaning or removal of a blockage;
–
inspection, maintenance or work on the hedge trimmer;
–
setting the working position of the cutting unit;
–
if the hedge trimmer is to be left unattended.
b) Always make sure that the hedge trimmer is in the proper working
position before the motor is started.
c) During operation of the hedge trimmer, always ensure that you have
firm footing, especially when using steps or a ladder.
d) Do not use the hedge trimmer if it has a defective or badly worn cutting
unit.
e) Ensure that all supplied handles and safety guards are mounted when
.
operating the hedge trimmer. Never attempt to operate an incomplete-
ly assembled hedge trimmer or a hedge trimmer with non-approved
modifications.
f) Hold the hedge trimmer firmly with both hands using the handles pro-
vided.
g) Always familiarise yourself with your environment and be aware of
potential dangers that you may not be able to hear because of the
noise of the hedge trimmer.
Maintenance and storage:
a) If the hedge trimmer is shut down for maintenance, inspection or stor-
age, switch off the motor and ensure that all rotating parts have come
to a standstill. Allow the machine to cool down before carrying out an
inspection, settings, etc.
b) Store the hedge trimmer where benzine fumes can not come into contact
with open fire or sparks. Always allow the hedge trimmer to cool before
storing.
c) When transporting or storing the hedge trimmer, cover the cutting unit
with the protective cover for the cutting unit.
GB │ IE 19
■
│