Tabla de contenido
E110 Front Panel
3
COMBO INPUT JACK
1
1/4" and XLR Instrument Input. WARNING: Never plug the output of a power amplifier into the input jacks.
Damage may occur to both units.
1/4" TUNER SEND JACK
2
This Jack is provided for you to connect your tuner directly to your amplifier. When the Mute Button (3) is
engaged, the amp is muted but the signal will pass to the tuner.
MUTE SWITCH
3
This button mutes the power section of the amplifier, while keeping the tuner output active. This feature is
switchable via the Ecoustic Series foot controller.
PHASE REVERSE SWITCH
4
This button reverses the phase of Channel I, which can be beneficial in controlling feedback. This feature
is switchable via the Ecoustic Series foot controller.
CHANNEL I GAIN CONTROL
5
Controls the amount of gain for Channel I.
CHANNEL I GRAPHIC EQ
6
Nine band graphic EQ. The frequency centers have been optimized for acoustic guitar.
CHANNEL I NOTCH FILTER CONTROL
7
The notch filter is another tool for controlling feedback. If you are experiencing feedback problems,
adjusting this knob for the correct amount of cut can help stop the feedback. The E110's notch filter is
centered at 450KHz, which can be a problem frequency for acoustic guitar.
CHANNEL II COMBO INPUT JACK
8
Accepts 1/4" or XLR type cables.
CHANNEL II GAIN CONTROL
9
Controls the amount of gain for Channel I.
CHANNEL II LOW EQ CONTROL
10
Controls the amount of low EQ present in the Channel II preamp.
CHANNEL II HIGH EQ CONTROL
11
Controls the amount of high EQ present in the Channel II preamp.
DIGITAL EFFECTS SECTION
12
Includes digital reverb, chorus and delay. A complete description of this section is found on page
21.
MASTER VOLUME CONTROL
13
This knob controls the overall volume of the amplifier.
14
Tabla de contenido
