Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ADDITION / SUBTRACTION MEASURING FUNCTION
The single section distance measurement can be of accumulated addition and subtraction operation
by addition and subtraction.
Press button "+"(3) to enter the accumulated addition measurement mode as "+" is displayed on
•
the measuring display area of screen; press measuring key again to add the measured results
with the previous measured value, then continue by this analogy.
Press button "-"(7) to enter the accumulated subtraction measurement mode as "-" is displayed
•
on the measuring display area of screen; press measuring key again to subtract the measured
results with the previous measured value, then continue by this analogy.
AREA AND VOLUME
Press button "FUNC"(6) once to display
•
when it is flickering and then measure the second side by this analogy.
The area will be calculated automatically in the main display area.
Press button "FUNC"(6) twice to display
•
when it is flickering, then measure the second side and third line by this analogy. The volume will
be calculated automatically in the main display area.
INDIRECT MEASUREMENT WITH PYTHAGOREAN THEOREM
Press button "FUNC"(6) thrice to display
•
the first side when one right-angle side is flickering and then the hypotenuse is flickering; press
measuring key again to measure the length of the hypotenuse.
The length of the other right-angle side will be calculated automatically by the instrument.
Press button "FUNC"(6) for four times to display
•
according to the flickering sequence. Then the length of section (I) will be calculated
automatically by the instrument.
DELAY MEASUREMENT AND MEMORY FUNCTION
1. Long press button "FUNC"(6) to enter the memory mode and select the previously measured
data by "+" or "-".
2. Press button "FUNC"(6) again to enter the delay measurement mode, in which the default delay
measurement is 5 sec. and the delay time can be selected by "+" or "-". Press
to start delay measurement.
THE LEVEL OF BUBBLE
The horizontal bubble serves as a reference.
When measuring the horizontal distance,
adjust the instrument to the center of the bubble.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycling centre and disposed of in a manner which is
compatible with the environment
DISPOSAL
Do not dispose battery in household waste. Batteries should be disposed of in a responsible
manner, they must be disposed at appropriate collection point. Dispose of this product at the end
of its working life in compliance with the EU Directive on Waste Electrical and Electronic
Equipment. Contact your local solid waste authority for recycling information or give the product
for disposal to BGS technic KG or to an electrical appliances retailer.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
icon. Press measuring key to measure the first side
icon. Press measuring key to measure the first side
icon. Press measuring key to measure the length of
icon. Measure the length of each side
Tel.: 02196 720480
Fax.: 02196 7204820
button „MEAS"(1)
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
