Fuel System - McCulloch CS 42S Manual De Instruccion

Ocultar thumbs Ver también para CS 42S:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 154
Perform the following steps after each use:
Allow the engine to cool, and secure the unit before
storing or transporting.
Store chain saw and fuel in a well ventilated area
where fuel vapors cannot reach sparks or open
switches, furnaces, etc.
Store chain saw with all guards in place and
position chain saw so that any sharp object cannot
accidentally cause injury.
Store chain saw well out of the reach of children.
SEASONAL STORAGE
Prepare your unit for storage at the end of the season
or if it will not be used for 30 days or more.
If your chain saw is to be stored for a period of time:
Clean saw thoroughly before storage.
Store in a clean dry area.
Lightly oil external metal surfaces and guide bar.
Oil the chain and wrap it in heavy paper or cloth.

FUEL SYSTEM

Fuel stabilizer is an acceptable alternative in
minimizing the formation of fuel gum deposits during
storage. Add stabilizer to the petrol in the fuel tank or
fuel storage container.
Follow the mix instructions found on stabilizer
containers. Run engine at least 5 minutes after adding
stabilizer.
ENGINE
Remove spark plug and pour 1 teaspoon of 2-cycle
engine oil through the spark plug opening. Slowly
pull the starter rope 8 to 10 times to distribute oil.
Replace spark plug with new one of recommended
type and heat range.
Check entire unit for loose screws, nuts, and bolts.
Replace any damaged, broken, or worn parts.
At the beginning of the next season, use only fresh
fuel having the proper petrol to oil ratio.
OTHER
Do not store petrol from one season to another.
Replace your petrol container if it starts to rust.
STORAGE
19
Tabla de contenido
loading

Este manual también es adecuado para:

Sasa242mc

Tabla de contenido