Glacier bay HD67673-0001 Guía De Uso Y Mantenimiento página 7

Installation (continued)
7
Attaching the quick connector
to the receiving block
□
Push the quick connector (G) rmly upward and
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been
made.
1
G
9
Making the water supply
connections
NOTE: The hot side inlet tube is indicated by a label. If the
label is not present, the hot supply tube is the longer of the
two inlet tubes.
□
Use 1/2 in. I.P.S. faucet connections (2), or use
supply line coupling nuts (3) (not included) with
a 3/8 in. O.D. ball-nose riser (1).
NOTE: Before tightening the faucet connector to the water
supply, apply a second wrench to the supply tube tting.
This will prevent the supply tube from moving or twisting
when tightening the faucet connector. Do not overtighten.
8
Installing the weight
□
After connecting the hose, install the weight (F)
at the point of the hose marking "weight here".
1
3
7
Please contact 1-855-HD-GLACIER for further assistance.
F
2
HOMEDEPOT.COM