Tabla de contenido
Idiomas disponibles
Idiomas disponibles
_ti]
Place Air Conditioner in window opening. It
should sit on Bracket assembly so that Curtain
Frame and cabinet Side Guides are against top and
side window jambs. Mate front of Bracket with Base
Guide attached to the bottom of base pan.
_1_ Drill 1/8 inch holes in window track through the
existing holes on Base Guide. Screw 4 Type C
screws through the holes. (Fig. 8)
_l_lf
this is a casement window installation,
proceed to Casement Window Installation. If not,
slide inner window sash firmly against side of the
cabinet.
_'1 Drill 1/8 inch hole in window jamb to align with
the existing holes in the Curtain Frame. Attach
Curtain Frame to window frame with 2 Type B
screws. (Fig. 8)
NOTE= Check all seals and plug any remaining air
gaps with a suitable weatherproof
caulk,
_'L_'l]lfthis is
casement window
a
installation,
proceed to Casement Window Installation. If not,
stuff the Foam Seal Strip between the vertical sash
and the window glass, (Fig, 9)
_'_
Attach the L Bracket with a Type B screw. (Fig. 9)
FIG. 9
CASEMENT
WINDOW
INSTALLATION
• Installstion procedure is the ssme as _st descdped in
sIeps 1 through t 1 and step 13 of the HorizontalSliding
Window installation.
• If the window opening iswider _an 15-3/4 inchesyou
will need to installa filler panel. Ma_e this panel from 3/4
inch thick wood and run it the full length of the window.
Attach it securely to the window frame and paint it to
proIect it from the weather.
• Since there is a wide variety ofcasement window styles
and sizes, these instructions rosy not be exa_ly suited
to your perticelsr situation. To ensure besI results, have
the work performed by someone skilled in installing
casement window air conditioners.
REMOVAL
FROM WINDOW
* Turn off and unplug the air conditioner.
* If horizontal s lidrng window=removethe L Bracket from
window frame and the Foam Seal Strip from betweenthe
windows.
* Remove the Safety Bracket that you installed in Step 12.
* Unscrew the Curtain Frame from the window frame.
* Remove air coadrtioner from the window opening.
BE CAREFUL NOT TO DROP IT. Once removed,set it
safely out of the way.
* Remove Curtain Frame and Curtain.
* Unscrewthe Side Guidesand Upper Guide.
* Place unit and all assemblyhardware in air cenbit[oaer
shipping carton, and store in a clean, dry place.
* Air conditioners covered in this manual pose an
excessive weight hazard. Two or more people
are needed to move and install the unit
To prevent injury or strain, use proper lifting and
carrying techniques when moving unit.
* When handling the air conditioner, be careful to
avoid cuts from sharp metal fins on front and
rear coils.
* Make sure air conditioner does not fall during
removal.
-8-
Capítulos
Tabla de contenido
