Troubleshooting; Reclining Tension Adjustment Instructions - LAZBOY ComfortTouch Instrucciones De Operación

(1CT) ComfortTouch Adjustable Firmness Recliner
™
Troubleshooting Instructions:
WARNING
– To reduce the risk of injur y:
• Do not attempt to disassemble or service the pump or motor. No serviceable
parts are inside. Contact your La-Z-Boy
Troubleshooting (1CT) ComfortTouch
There are no user maintenance or repair requirements. If any of the electrical
components or functions do not work:
1. Make sure the chair is plugged into a grounded electrical outlet.
2. Make sure the electrical outlet is working. For example, make sure there are
no blown fuses or tripped circuit breakers.
3. Make sure the back air hose connection is completely tightened, and not
loose; refer to the Assembly Instructions.
4. Make sure the seat air hose connection is completely tightened, and not
loose. The seat air hose connection is fastened in production but may
become loose during shipping.
5. Make sure the electrical cord is not crimped or pinched. Make sure the
electrical cord or plug is not damaged.
If the electrical components or functions still do not operate properly, contact
your dealer for instructions on returning the unit for examination and repair.
Never attempt to make any repairs or adjustments yourself.
12
® dealer for service information.
™ Adjustable Firmness Recliner
Reclining Tension Adjustment
Instructions:
WARNING
– To reduce the risk of injur y:
• This unit is equipped with a tension adjustment feature for the reclining
mechanism that is preset at the factor y. The tension setting can be
changed for your personal preference. To avoid tip over and insure
stability, do not operate the unit with the tension adjustment wing nuts
completely loosened.
NOTICE
– To reduce the risk of product damage:
• Make sure the legrest is closed before tilting forward and adjusting
the tension.
• Do not completely tighten the wing nuts. The tension springs should not be
completely compressed after making adjustments. If this occurs, the wing
nuts must be loosened a minimum of
tension assembly.
• Do not completely loosen the wing nuts. The spring should not slide on
the bolt after making adjustments. If the spring slides on the bolt, tighten
the wing nut clockwise a minimum of
slides on the bolt.
• Adjust bot h wing nuts equally.

Reclining Tension Adjustment Instructions:

You can adjust the tension of the reclining mechanism to respond to your
individual size.
1. Unplug from the electrical outlet. Gently roll the reclining chair forward to rest
on its arms and top of the back. Locate the wing nuts, one on each side, toward the
back of the recliner under the reclining seat (only one side shown below).
2. Adjust the tension by turning the wing nuts in
desired setting is reached.
• A taller or heavier person may choose to increase the reclining tension
by tightening the wing nuts clockwise.
• A smaller person may choose to decrease the reclining tension by
loosening the wing nuts counterclockwise.
3. Return the reclining chair to the upright position and test the new setting.
Make additional adjustments if needed, repeating these steps. Plug directly
into a grounded outlet.
1 ⁄ -turn to avoid damage to the spring
2
1 ⁄ -turn after the spring no longer
2
1 ⁄ -turn increments until the
4
Wing Nut Tension Spring
13