Li-Ion Battery Charge Status Display - Hilti AG 125-A36 Manual Del Usuario

3.7 DG-EX 125/5" dust hood for grinding (accessory)
The grinding system is suitable only for occasional use with diamond cup wheels for grinding mineral
materials.
CAUTION Use of this hood for working on metal is prohibited.
3.8 Consumables
Use only synthetic-resin-bonded, fiber-reinforced discs with a maximum Ø of 125 mm or max. Ø of 150 mm,
as applicable, approved for a peripheral speed of 80 m/s.
The maximum grinding disc thickness is 6.4 mm and the maximum cutting disc thickness is 2.5 mm.
WARNING! When cutting or slitting with abrasive cutting discs always use the standard guard with
the additional front cover, or a fully enclosing dust hood.
Discs
Abrasive cutting disc
Diamond cutting disc
Abrasive grinding disc
Diamond grinding disc
Diamond core bit
Suitability of discs for the equipment used
Item Equipment
A Guard
B Front cover (in combina-
tion with A)
C DG­EX 125/5" guard for
surface grinding
D DC­EX 125/5"-C com-
pact guard (in combina-
tion with A)
E Side handle
F DC BG 125 hoop grip
(optional for E)
G Clamping nut
H Clamping flange
I Kwik lock (optional for
G)

3.9 Li-ion battery charge status display

The charge status of the Li­ion battery is displayed after one of the two battery release buttons is pressed.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights up.
1 LED blinks.
Note
Indication of the charge status is not possible while the power tool is in operation or immediately
after operation. If the battery charge status LEDs blink, please refer to the information given in the
Troubleshooting section.
22 English
Printed: 15.12.2016 | Doc-Nr: PUB / 5246577 / 000 / 02
4
Application
Cutting, slitting
Cutting, slitting
Rough grinding
Rough grinding
Drilling in tiles
AC­D AG-D AF-D
X X X
X - -
­ ­ ­
­ ­ ­
X X X
X X X
X X X
X X X
X X X
Meaning
• Charge status: 75 % to 100 %
• Charge status: 50 % to 75 %
• Charge status: 25 % to 50 %
• Charge status: 10 % to 25 %
• Charge status: < 10 %
Designation Material
AC­D Metal
DC-TP, DC-D (SPX, Mineral
SP, P)
AG­D, AF­D, AN­D Metal
DG-CW (SPX, SP, Mineral
P)
DD-M14 Mineral
AN-D DG­CW DC­D
X X X
- - X
­ X ­
­ ­ X
X X X
X X X
X X X
X X X
X ­ X
DD-M14
X
-
­
­
X
X
­
­
­