ProMed IRT-100 Instrucciones De Empleo página 23

INTRODUCTION
B. Now press the function key (C) again and "2" appears in the display, followed by the
last measurement value but one and the memory symbol "M" flashes.
D. By repeatedly pressing the function key (C), the last 30 measurement values (beginning
with the most recent) are shown.
E. After the 30th measurement value, the display starts from the 1st measurement value
again.
Changing the unit of measurement
In order to change the unit of measurement from Celsius to Fahrenheit (°C/°F) press and hold
the function key (C) for approx. 8 sec. with the thermometer switched off and either °C or °F
flashes in the display, depending on the predefined unit. To change the unit of measurement,
press the function key (C) again and save the setting by pressing the on/off button (D).
Beeps/signal tones
The device has 4 different beeps/signal tones for indicating events/measures to you.
Tones
1 short beep
3 short beeps
Alternating quicker and slower tones
Meaning
Device start/preparation for measurement
Indicates an error/system fault
Measurement in progress
23
DE
EN
FR
IT
ES
NL
RU
PL
TR
AR