Exemption From Liability; Disposal Information - Flex DD 2G 10.8-LD Instrucciones De Funcionamiento Originales

conformity
We declare under our sole responsibility that the product
described under page 6 conforms to the following standards or
normative documents: EN 60745 according to the provisions of Directives 2014/
30/EU, 2006/42/EC,
2011/65/EC.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
29.06.2016; FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr

Disposal information

WARNING!
Render redundant power tools unusable:
– mains operated power tool by removing the power cord,
– battery operated power tool by removing the battery.
EU countries only
Do not dispose of electric power tools in the household
waste! In accordance with the European Directive 2012/19/
EC on Waste Electrical and Electronic Equipment and its
incorporation into national law, used power tools must be
collected separately and recycled in an environmentally
friendly manner.
Raw material recovery instead of waste disposal.
Device, accessories and packaging should be
recycled in an environmentally friendly manner. Plastic parts
are identified for recycling according to material type.
WARNING!
Do not throw batteries into the household waste, fire or
water. Do not open disused batteries.
Batteries should be collected, recycled or disposed of in an
environmentally friendly manner.
EU countries only:
In accordance with Directive 2006/66/EC defective or used
batteries must be recycled.
NOTE
Please ask your dealer about disposal options.
16

Exemption from liability

The manufacturer and his representative are not liable for any
damage and lost profit due to interruption in business caused
by the product or by an unusable product. The manufacturer and his representative are not liable for any damage which was
caused by improper use of the product or by use of the product
with products from other manufacturers.
DD 2G 10.8-LD