Proto J138WP-M Manual De Operación Y Mantenimiento página 2

TABLE OF CONTENTS
Introduction
Safety Instructions
Specifications
Getting Started
Tool Components
Contact Information
INTRODUCTION
The PROTO J138WP-M and J150WP-M are precision-built tools, designed for professionals for high torque assembly
®
and disassembly of threaded fasteners. These tools will deliver efficient, dependable service when used correctly and
with care. As with any fine power tool, for best performance the manufacturer's instructions must be followed. Please
study this manual before operating the tool and understand the safety warnings and instructions. The instructions on
installation, operation and maintenance should be read carefully, and the manuals kept for reference. NOTE: Additional
safety measures may be required because of your particular application of the tool. Contact your PROTO
any questions concerning the tool and its use.
Do not use damaged, frayed or deteriorated air hoses
and fittings.
Air powered tools can vibrate in use. Vibration, repetitive
motions or uncomfortable positions may be harmful to
your hands and arms. Stop using any tool if discomfort,
tingling feeling or pain occurs. Seek medical advice before
resuming use.
Do not carry the tool by the hose.
Keep body stance balanced and firm. Do not overreach
when operating this tool.
Always turn off the air supply and disconnect the air
supply hose before installing, removing or adjusting any
accessory on this tool, or before performing any mainte-
6.2 bars
(90 psig/
620 kPa)
nance on this tool.
2
2
3
4
5
6, 7
8
PROTO INDUSTRIAL TOOLS
2195 East View Parkway
Suite 103
Conyers, Georgia 30013
Phone: +1 800-800-TOOL
Fax: +1 770-648-9108
www.protoindustrial.com
IMPORTANT SAFETY INFORMATION ENCLOSED.
READ THIS MANUAL BEFORE OPERATING THE MACHINE.
SAVE FOR FUTURE REFERENCE
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
6.2 bars
(90 psig/
620 kPa)
6.2 bars
(90 psig/
620 kPa)
WARNING
Always wear hearing protection when operating
this tool.
6.2 bars
(90 psig/
620 kPa)
6.2 bars Always wear eye protection when operating or
(90 psig/
620 kPa)
performing maintenance on this tool.
6.2 bars
(90 psig/
620 kPa)
Always wear respiratory protection when operating
this tool.
6.2 bars
(90 psig/
620 kPa)
Operate at 90 psig (6.2 bar / 620 kPa) Maximum
air pressure.
6.2 bars
(90 psig/
620 kPa)
Distributor with
®
6.2 bars
(90 psig/
620 kPa)