Volume Control - Sonic Impact Technologies i-F2 Guía De Usuario

wall jack. Your i-F2 is ready to play. When docked, your iPod will also recharge when using the AC
adapter.
To use the rechargeable, built-in, Lithium ion battery supply:
The i-F2 system has a powerful, rechargeable Lithium ion battery built into the case. Utilizing this
independent power source, you can play your iPod for hours between charges.
recharging of the iPod does not occur when powering off the Lithium ion battery.
START PLAYING
1. With your iPod seated in the docking station, or connected via the 3.5 mm stereo cable, slide the
power switch on the front panel to "AUTO ON" position to turn the i-F2 on. The LED
display will turn green.
2. Turn on your iPod, adjust the volume using the volume adjustment on the i-F2, and play your
favorite tunes. (Note that the iPod's volume control is bypassed when docked in the i-F2.)

VOLUME CONTROL

The buttons on the front panel are the master volume controls for the i-F2 system. Press and
hold "+"to increase the volume and then "-"to decrease the volume.
volume position every time you re-start the i-F2 system.
REMOTE USAGE
Specified remote included in i-F2 system can do normal operations to ipod player
and i-F2 system
1. Remote is located in the Headphone & Remote compartment. Please follow the
illustration in the Quick Connect instruction to take it out or put it in
2. Special remote uses one button battery to fully realize the functions of the audio
system. Please refer to the illustration in the Quick Connect instruction to replace
the dead battery
All manuals and user guides at all-guides.com
Please note that
The volume will start at the
1． Infrared Transmit Head
2． Power On/ Power Off
3． Prev
4． Vol-
5． Play/ Pause
6． Next
7． Vol+
8． Battery Nog
3. While using the remote, please ensure that the Infrared transmit head is rightly
aimed at the reception head on the i-F2 system, at the distance of 6M, at the angle
of 60℃.The area shadowed in the graph is the valid scope for the remote.