SIT Group 190 Serie Instrucciones Para La Instalación Y El Uso página 9

Pilot gas connection for 199 series
See Fig. 5.
The minimum bending radius R for pilot tube must be no less than 0.59 in (15 mm): it is
recommended to use a tube bender.
The minimum bending radius R for thermocouple conductor must be no less than 0.59 in (15 mm).
CauTION
DO NOT BEND TuBING NEaR FITTING aFTER TIGHTENING aS
THIS maY RESulT IN GaS lEakaGE aT CONNECTION.
DO NOT BEND THE PIlOT PIPE BElOW THE mINImum
RECOmmENDED RaDIuS.
CauTION
DO NOT BEND THE THERmOCOuPlE CONDuCTOR BElOW THE
mINImum RECOmmENDED RaDIuS.
CauTION
DuRING THE INSTallaTION, maNaGE CaREFullY TO
PREvENT kINkS aND CRaCkS IN THE TuBING OF GaS
aND THERmOCOuPlE CONNECTION.
R
Fig. 
R
R
R
9