Bosch Rexroth KE310 Manual De Instrucciones página 21

3 609 929 986/1.0 | KE310
5 Commissioning
5.5 Available modules
Three module card slots are available for ex-
pansion of the communication unit. These
can be equipped as follows:
Module
Field bus: Interbus-S SMibs
Field bus: Profibus DP
SMpdp
Field bus: DeviceNet SMdev 0 608 830 248
Parallel: 24 V I/O SM24V
Serial: RS232, RS422,
20 mA SMser
Network: Ethernet SMeth
Table 6:
SMpdp, SMdev and SMeth can each be
used only once.
Only hardware version 2.1 is permitted in the
KE310 with SMeth (Fig. 13).
Figure 13:
Electric Drives and Controls | Bosch Rexroth AG 21/64
For safety and EMC reasons, close off slots
that are not occupied by Rexroth interface
modules with BP302 dummy panels, order
no. 3 608 871 392.
Order number
0 608 830 164
0 608 830 165
0 608 830 166
0 608 830 167
0 608 830 168
Insert the modules into the communication
unit from the front and secure them with bolts
against unintended loosening.
Before inserting the in-
terface modules, the
system boxes or
3 Min
BT300 card rack must
be switched to neutral
and a discharging time
of ≥ 3 minutes must be
taken into account.