UPPAbaby G-LINK Manual De Instrucciones página 7

STROLLER OPERATION
OPERATING THE RESTRAINT BUCKLE
Attaching the Restraint Buckle: Slide plastic clip into
buckle until you hear a "click".
ADJUSTING THE SEAT HARNESS
STEP 1: Locate plastic clip on back of seat and pull
through the harness slot to remove.
REMOVING THE CANOPY
STEP 1: Release Velcro ® located on left, right and center
of each seat pad.
10
Releasing the Restraint Buckle: Press center button
to disengage.
STEP 2: Feed plastic clip through desired slot and push
completely through until plastic clip rests against seat
back. Pull on harness strap to ensure plastic clip is
secured in place.
STEP 2: Rotate canopy attachments away from stroller
frame to release.
STROLLER OPERATION
INFANT MODE FOR NEWBORN USE
ADJUSTING THE HEAD BARRIER
USING THE INFANT FOOT BARRIER
STEP 1: Raise footrest to the upright STEP 2 : Locate mesh foot barrier
position by lifting each side and tucked under seat pad.
sliding tabs to lock in place .
ADJUSTING THE INFANT HEAD ROLL
STEP 1: Recline seat fully.
NOTE: DO NOT use upright position for infants less than six months old. Use the most reclined position
and gradually reposition seat upright as child is able to support his or her head without assistance.
Rotate head barrier forward from behind top of seat.
STEP 3: Attach snaps to bottom
of outer side flaps. Repeat on other
side.
STEP 2: Slide shoulder harness straps through slots on
head roll.
11