Help In Case Of Malfunctions - AL-KO HT 36 LI Manual Del Usuario

Help in case of malfunctions

HELP IN CASE OF MALFUNCTIONS
Malfunction
Machine does not run
Machine keeps cutting out
Machine is overloaded
Blades get hot
Battery operating time is
significantly shorter
Battery cannot be charged Charge plug or contact socket con-
Machine is vibrating
ADVICE
If you encounter any malfunctions that are not listed in this table or which you cannot rectify
yourself, please contact our responsible customer service.
441675_a
Possible cause
Motor protection switch has swit-
ched off
Flat battery
Battery is not engaged or has
come loose
On/off switch defective
Internal fault
Protective mechanism
Lack of lubrication
Blades blunt
Nicks in the blade
Battery flat because not used for
some time
Battery service life expired
Lack of lubrication
Blunt or damaged blade
taminated
Battery or charger defective
Internal fault
Solution
Wait until the motor protection
switch switches the machine back
on.
Charging the battery
Check the location of the battery
and engage it if necessary
Contact an AL-KO service centre
See the Safety and protective de-
vices chapter
Oil the blades lightly
Contact an AL-KO service centre
Contact an AL-KO service centre
Charge the battery
Renew the battery. Only use ge-
nuine accessories from the manu-
facturer.
Oil the blades lightly
Contact an AL-KO service centre
Order spare parts acc. to the spare
parts card
Contact an AL-KO service centre
21