Idiomas disponibles
Idiomas disponibles
GPS
DOG
TRACKER
S Y S T È M E G P S P O U R
C H I E N
3
APN Setup of the tracker
Warning: Please be sure to configure the SIM card APN before using the
device. The SIM card APN must not have a username or password. Link to
find the operator APN: http://wiki.apnchanger.org/Pays. e.g. for Spain:
Http://wiki.apnchanger.org/Spain
To set up APN SIM card, send the following text message to the SIM card
phone number tracer: 510 # 0000 # APN of SIM card *.
* If you do not know the APN of the SIM card, contact the customer service
of your mobile operator.
For example:
510#0000#XXXAPN
Then press "Send".
After receiving the answer:
SETUP OK: APN = XXXAPN
IP = 59.120.198.208:6969, you
can start using the tracer.
6
Display and hide the device
After adding, the default display status of the device is ON, and the device
will Display on the map.
Pressing ON/OFF can switch the display status of the device on the map.
When the status is OFF, the device will hide on the map.
9
History route
9
History route:
Select the date to check the route of the tracker on the date.
Select the first line to get the data from the first
position among all positions of the history route.
Press here to
get the list of
data for each
location of
the route.
For Android, please download the application
by scanning the QR code on the left (use a QR
code scanner only / Flash code scanners are
not compatible). Use the "Settings" icon to
select the language.
For iOS, please download the application by
scanning the QR code on the left (use a QR
code scanner only / Flash code scanners are
not compatible).
Delete the PIN code of the SIM card of the
1
tracker
Warning: SIM card not included. A standard SIM card with GPRS
data transfer is required.
Delete the PIN code of the SIM card with your phone. Insert the
SIM card of the tracer in your phone and delete the PIN code.
Deleting the PIN code of the SIM card depends on your phone
model. Refer to the user guide of your phone or contact the
customer service of your mobile operator.
4
Map - Instruction
1. Device: allows you to add, delete, view or
hide a tracer
2. Map: Display the background map in
"plan" mode
3. Settings: Remote parameter settings of
the selected tracer
4. Icon: Change the icon of the selected
tracer
5. Your current position: viewing the
phone's position on the map
6. Direction from your current position to the
tracer
7. Your position on the map
8. Displaying the map: maps, satellite or
Street View
9. History data of the positions of the tracer
10.Tracer position on the map
11.Select the tracer
12.GPS signal status
13.Address of the tracer position
14.IMEI of the tracer / date, time and refresh
the tracer's position
15.Direction taken by the tracer
7
Change Icon
4
Change icon picture:
choose your flavor picture from default picture /
Album / Take Picture:
4
10
GPS and LBS
GPS :
When the GPS signal is good, it will use GPS to fix the location
LBS :
When the GPS signal is weak, the tracker uses the telephone network
to locate the position. The accuracy is 100 to 300 meters in urban areas and
500 m 2 kilometers in rural areas.
2
Tracker installation
1. Charge the tracer for 2 hours.
Warning: The unit must be turned off
during charging.
2. Open the back lid, insert the SIM card, put back the back lid, and then lock
the screw.
Turn on:
Long press
the power key for 5
Insert SIM card
seconds. All LED blink
one time
together.
Turn off:
Long press
the power key for 5
seconds.
All LED blink one time by
Charger
turns.
cable
entry
3. Make the collar through the docking
4. Follow the arrow, spin and lock to finish installation
Arrows
5. Apply the silicon band to the tracker would enhance the attachment of the
tracker.
5
Display and hide the device
Press "Device" on the application.
Two way to add the device:
1. Enter the IMEI number sticked
Delete the tracer
on the tracker, and then press
1. Press【Delect Device】
"Create" to add the tracer.
2. Press 【Delete】
2. Scan the IMEI barcode to add
the tracer.
8
Checking GPS signal
Warning: after 3 minutes without movement, the device goes into sleep mode
(GSM / GPS off). In standby mode, the tracker does not work. Gently shake
the tracker to reactivate.
11
Select the tracker:
when you have multiple devices registered, you can
select the one you want to check.
12
GPS signal status:
press this button to check the status of the GPS signal
GPS signal status
12
11
11
Parameter setting
1
Selection of the tracker:
Select the tracker among multiple devices for
remote setting.
Set how frequently you want the data to
2
Change Nickname
be saved in the history. It is suggested not
3
Report time
to set a frequency less than 5 minutes to
4
Urgent number (when low power)
save the battery life.
5
Time zone
The mobile number to contact
battery is low.
*During the
charging,
the Red LED will be
on and
it will be off when it
is full charged.
LED Indicator:
Red: Power
Blue: GPS/LBS
Orange: GSM/GPRS
Lock
Unlock
GPS satellite
serial numbers
Country
code
when the
