Cleaning And Maintenance - Steinberg Systems SBS-WS-600 Manual De Instrucciones

ANDROID iOS
3.3.2. CALIBRATION
After entering "LIVE DATA" press the "MORE" icon in the
upper right corner and select the calibration option.
3.3.3. RAINFALL
After entering "LIVE DATA", press the "MORE" icon in the
upper right corner and select rainfall.
3.3.4. DEVICE SETTINGS
After entering "LIVE DATA" press the "MORE" icon in the
upper right corner and select the device settings option.
The settings option enables you to:
EN
• select the sensor type
• set the time zone
• reboot the device
• factory reset.
3.3.5. SENSOR ID
After entering "LIVE DATA", press the "MORE" icon in
the upper right corner and select the sensor ID option.
In the sensor ID option the following parameters can be
configured / checked:
• sensor ID, signal bar and battery charge status.
• register the sensor offline.
• enable or disable the sensor.
• enter the sensor ID offline.

3.4. CLEANING AND MAINTENANCE

a) Wait for the rotating elements to stop.
b) Use only non-corrosive cleaners to clean the surface.
c) Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
d) The device must be regularly inspected to check its
technical efficiency and spot any damage.
e) Use a soft, damp cloth for cleaning.
f) When replacing batteries, use an anti-corrosive
agent.
g) In a snowy environment, spray the top of the weather
station with anti-icing agent.
3.4.1. CLEANING THE PRECIPITATION METER
1. Turn the funnel counterclockwise.
2. Lift the funnel.
3. Clean the rain meter with a soft, damp cloth. If
insects need to be removed, it is recommended to
use an insecticide before cleaning.
4. Insert the funnel in its original position and tighten it
clockwise.
SAFE REMOVAL OF BATTERIES AND RECHARGEABLE
BATTERIES
1.5V AA batteries are installed in the devices. Remove
used batteries from the device using the same procedure
by which you installed them. Recycle batteries with the
appropriate organisation or company.
4. SOFTWARE
Note: WIFI firmware version 1.4.4 and above support
Global Time synchronization. Time zone, DST and date will
be automatically updated from the internet when the base
station is connected to the internet.
4.1. LIVE ONLINE PUBLISHING
Your console is capable of sending your sensor data to
select internet-based weather services. The supported
services are shown in the table below:
Hosting Service Website Description
Ecowitt https://www. Ecowitt is a new
Weather ecowitt.net weather server that can
host multiple sensors
that other servers
don't support.
Weather https://www. Weather Underground
Undergound wunder- is a free weather
ground.com hosting service
that allows you to
send and view your
weather station data
real-time, view graphs
and gauges, import
text data for more
detailed analysis
and use iPhone,
iPad and Android
applications available
at Wunderground.com.
Weather Underground
is a subsidiary of The
Weather Channel and
IBM.
Weather https:// Weathercloud is a
Cloud weather- real-time weather social
cloud.net network formed by
observers from around
the world.
24
Weather http://wow. WOW is a UK based
Observation metoffice. weather observation
Website gov.uk/ website. WOW allows
(WOW) anyone to submit their
own weather data,
anywhere in the world.
4.2. CONNECTING THE WEATHER STATION CONSOLE
TO WIFI
To send weather data to these services you must connect
your console to the internet via WiFi. The console can
only operate using WiFi when the external power adapter
is connected and plugged in. Note: If you are testing
the setup of the outdoor sensor package indoor, you
may want to consider connecting to WiFi, but not yet
configuring any of the weather services. The reason is
that indoor temperatures and humidity recorded by the
outdoor sensors will be reported to the weather service(s)
and they will reflect indoor conditions, and not outdoor
conditions. Therefore, they will be incorrect. Furthermore,
the udometer may be tripped during handling, causing rain
to register when it may not actually have been raining. The
configuration of the WiFi connection of the weather station
should be done after the sensors are installed outdoors!
4.2.1. DOWNLOAD MOBILE APPLICATION
WiFi configuration is done using your mobile device,
either iOS or Android. Start by downloading the "WS View"
application from the Apple App Store or Google Play store,
as appropriate for your device.
4.2.2. CONNECT THE CONSOLE TO WIFI
4.2.2.1. ANDROID USER
Activate the application you have downloaded on your
mobile device. The following instructions will generally
show screens for the Android application side by side.
Configure Device
1) Select your device from the device list, then press
Next.
2) Follow the instructions, tick the box to confirm
"completed operation", press Next.
3) Start searching for your device. If the device is in your
WiFi list, it will jump to the view as in Figure 4. The
device has the name "EasyWeather-WIFI" followed
by four characters.
4) Press Scan and select your SSID from the list, then
enter your WiFi password and press Next. If you own
a dual band router (2.4 GHz and 5.0 GHz), make sure
you connect to the 2.4 GHz band, otherwise it will fail
to connect the weather station to WiFi.
25
EN